R211x-HP Flexfabric 11900 OAA Command Reference

3
Syntax
oap client close client-id
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
client-id: Specifies an OAP client by its ID in the range of 1 to 255.
Usage guidelines
Client IDs are assigned by the OAP manager to OAP clients to uniquely identify the clients.
This command applies only to OAP clients on Linux.
When you execute this command for a client in registered state, the OAP manager sends a shutdown
notification to the specified OAP client. The client stops after receiving the notification. When you execute
this command for a non-existent client, an error message appears.
Examples
# Shut down OAP client 1.
<Sysname> system-view
[Sysname] oap client close 1
Related commands
• display oap client summary
• oap client reboot
oap client reboot
Use oap client reboot to restart an OAP client.
Syntax
oap client reboot client-id
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
client-id: Specifies an OAP client by its ID in the range of 1 to 255.
Usage guidelines
Client IDs are assigned by the OAP manager to OAP clients to uniquely identify the clients.