R211x-HP Flexfabric 11900 Security Command Reference

101
Examples
# Configure the mandatory authentication domain my-domain for 802.1X users on Ten-GigabitEthernet
1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] dot1x mandatory-domain my-domain
Related commands
display dot1x
dot1x max-user
Use dot1x max-user to set the maximum number of concurrent 802.1X users on a port.
Use undo dot1x max-user to restore the default.
Syntax
dot1x max-user user-number
undo dot1x max-user
Default
The maximum number of concurrent 802.1X users on a port is 1024.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
mdc-admin
Parameters
user-number: Specifies the maximum number of concurrent 802.1X users on a port. The value range is 1
to 1024.
Usage guidelines
Set the maximum number of concurrent 802.1X users on a port to prevent the system resources from being
overused. When the maximum number is reached, the port denies subsequent 802.1X users.
Examples
# Set the maximum number of concurrent 802.1X users on Ten-GigabitEthernet 1/0/1 to 32.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] dot1x max-user 32
Related commands
display dot1x
dot1x multicast-trigger
Use dot1x multicast-trigger to enable the 802.1X multicast trigger function.