R211x-HP Flexfabric 11900 Security Command Reference

105
Syntax
dot1x re-authenticate
undo dot1x re-authenticate
Default
The periodic online user re-authentication function is disabled.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
Periodic re-authentication enables the access device to periodically authenticate online 802.1X users on
a port. This function tracks the connection status of online users and updates the authorization attributes
assigned by the server.
You can use the dot1x timer reauth-period command to configure the interval for re-authentication.
Examples
# Enable the 802.1X periodic online user re-authentication function on Ten-GigabitEthernet 1/0/1 and
set the periodic re-authentication interval to 1800 seconds.
<Sysname> system-view
[Sysname] dot1x timer reauth-period 1800
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] dot1x re-authenticate
Related commands
• display dot1x
• dot1x timer
dot1x retry
Use dot1x retry to set the maximum number of attempts for sending an authentication request to a client.
Use undo dot1x retry to restore the default.
Syntax
dot1x retry max-retry-value
undo dot1x retry
Default
The maximum number of attempts that the device can send an authentication request to a client is two.
Views
System view
Predefined user roles
network-admin