R211x-HP Flexfabric 11900 Security Command Reference

126
Syntax
port-security authorization ignore
undo port-security authorization ignore
Default
A port uses the authorization information from the server.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
After a user passes RADIUS or local authentication, the server performs authorization based on the
authorization attributes configured for the user's account. For example, it can assign a VLAN. If you do
not want the port to use such authorization attribute for users, you can use this command to ignore the
authorization information received from the server.
Examples
# Configure port Ten-GigabitEthernet 1/0/1 to ignore the authorization information from the
authentication server.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] port-security authorization ignore
Related commands
display port-security
port-security enable
Use port-security enable to enable port security.
Use undo port-security enable to disable port security.
Syntax
port-security enable
undo port-security enable
Default
Port security is disabled.
Views
System view
Predefined user roles
network-admin
mdc-admin