R211x-HP Flexfabric 11900 Security Command Reference

149
Parameters
max-record-num: Specifies the maximum number of history password records for each user. The value
range is 2 to 15.
Usage guidelines
When the number of history password records reaches the set maximum number, the subsequent history
record overwrites the earliest one.
The system stops recording passwords after you execute the undo password-control history enable
command, but it does not delete the prior records.
To delete the existing records, use one of the following methods:
• Use the undo password-control enable command to disable the password control feature globally.
• Use the reset password-control history-record command to clear the passwords manually.
Examples
# Set the maximum number of history password records for each user to 10.
<Sysname> system-view
[Sysname] password-control history 10
Related commands
• display password-control
• password-control history enable
• reset password-control blacklist
password-control length
Use password-control length to set the minimum password length.
Use undo password-control length to restore the default.
Syntax
password-control length length
undo password-control length
Default
In non-FIPS mode, the global minimum password length is 10 characters.
In FIPS mode, the global minimum password length is 15 characters.
In both non-FIPS and FIPS modes, the minimum password length for a user group equals the global
setting, and the minimum password length for a local user equals that of the user group to which the local
user belongs.
Views
System view, user group view, local user view
Predefined user roles
network-admin
mdc-admin