R211x-HP Flexfabric 11900 Security Configuration Guide

182
Terminating the connection with the SFTP server
Task Command Remarks
Terminate the connection with the
SFTP server and return to user view.
• bye
• exit
• quit
Use one of the commands.
Available in SFTP client view.
These three commands function in the
same way.
Configuring the device as an SCP client
This section describes how to configure the device as an SCP client to establish a connection with an SCP
server and transfer files with the server.
When you try to access an SCP server, the device must use the server's host public key to authenticate the
server. If you have not configured the server's host public key on the device, the device will ask you
whether you want to continue with the access.
• If you choose to continue, the device accesses the server and downloads the server's host public
key.
• If you choose to not continue, the connection cannot be established.
In an insecure network, HP recommends that you configure the server's host public key on the device.
To transfer files with an SCP server: