R211x-HP Flexfabric 11900 Security Configuration Guide

183
Task Command Remarks
Connect to
the SCP
server, and
transfer files
with the
server.
• In non-FIPS mode, connect to the IPv4 SCP server, and transfer files with
this server:
scp server [ port-number ] [ vpn-instance vpn-instance-name ] { put | get }
source-file-name [ destination-file-name ] [ identity-key { dsa | rsa } |
prefer-compress zlib | prefer-ctos-cipher { 3des | aes128 | aes256 |
des } | prefer-ctos-hmac { md5 | md5-96 | sha1 | sha1-96 } | prefer-kex
{ dh-group-exchange | dh-group1 | dh-group14 } | prefer-stoc-cipher
{ 3des | aes128 | aes256 | des } | prefer-stoc-hmac { md5 | md5-96 |
sha1 | sha1-96 }] * [ publickey keyname | source { interface
interface-type interface-number | ip ip-address } ] *
• In FIPS mode, connect to the IPv4 SCP server, and transfer files with this
server:
scp server [ port-number ] [ vpn-instance vpn-instance-name ] { put | get }
source-file-name [ destination-file-name ] [ identity-key rsa |
prefer-compress zlib | prefer-ctos-cipher { aes128 | aes256 } |
prefer-ctos-hmac { sha1 | sha1-96 } | prefer-kex dh-group14 |
prefer-stoc-cipher { aes128 | aes256 } | prefer-stoc-hmac { sha1 |
sha1-96 }] * [ publickey keyname | source { interface interface-type
interface-number | ip ip-address } ] *
• In non-FIPS mode, connect to the IPv6 SCP server, and transfer files with
this server:
scp ipv6 server [ port-number ] [ vpn-instance vpn-instance-name ] [ -i
interface-type interface-number ] { put | get } source-file-name
[ destination-file-name ] [ identity-key { dsa | rsa } | prefer-compress zlib
| prefer-ctos-cipher { 3des | aes128 | aes256 | des } | prefer-ctos-hmac
{ md5 | md5-96 | sha1 | sha1-96 } | prefer-kex { dh-group-exchange |
dh-group1 | dh-group14 } | prefer-stoc-cipher { 3des | aes128 | aes256
| des } | prefer-stoc-hmac { md5 | md5-96 | sha1 | sha1-96 }] *
[ publickey keyname | source { interface interface-type interface-number
| ip
v6 ipv6-address } ] *
• In FIPS mode, connect to the IPv6 SCP server, and transfer files with this
server:
scp ipv6 server [ port-number ] [ vpn-instance vpn-instance-name ] [ -i
interface-type interface-number ] { put | get } source-file-name
[ destination-file-name ] [ identity-key rsa | prefer-compress zlib |
prefer-ctos-cipher { aes128 | aes256 } | prefer-ctos-hmac { sha1 |
sha1-96 } | prefer-kex dh-group14 | prefer-stoc-cipher { aes128 |
aes256 } | prefer-stoc-hmac { sha1 | sha1-96 }] * [ publickey keyname |
source { interface interface-type interface-number | ipv6 ipv6-address } ]
*
Use one of the
commands.
Available in
user view.
Displaying and maintaining SSH
Execute display commands in any view.
Task Command
Display the source IP address or source
interface information configured for the SFTP
client.
display sftp client source