R211x-HP Flexfabric 11900 Security Configuration Guide

192
Figure 56 Specifying the private key file
g. Click Open to connect to the server.
If the connection is successfully established, the system asks you to enter the username. After
entering the username (client002), you can enter the CLI of the server.
Password authentication enabled Stelnet client configuration
example
Network requirements
As shown in Figure 57, you can log in to Switch B through the Stelnet client that runs on Switch A and are
assigned the user role network-admin for configuration management. Switch B acts as the Stelnet server
and uses password authentication. The username and password of the client are saved on Switch B.
Figure 57 Network diagram
Configuration procedure
1. Configure the Stelnet server:
# Generate the RSA key pairs.
<SwitchB> system-view