R211x-HP Flexfabric 11900 Security Configuration Guide

204

# Create a local device management user named client001 with the plaintext password aabbcc

and service type ssh.

[SwitchB] local-user client001 class manage

[SwitchB-luser-manage-client001] password simple aabbcc

[SwitchB-luser-manage-client001] service-type ssh

[SwitchB-luser-manage-client001] quit

# Create an SSH user client001 with service type scp and authentication method password. By

default, password authentication is used if an SSH user is not created.

[SwitchB] ssh user client001 service-type scp authentication-type password

2. Configure an IP address for VLAN-interface 2 on the SCP client.

<SwitchA> system-view

[SwitchA] interface vlan-interface 2

[SwitchA-Vlan-interface2] ip address 192.168.0.2 255.255.255.0

[SwitchA-Vlan-interface2] quit

[SwitchA] quit

3. Connect to the SCP server, download the file remote.bin from the server, and save it locally with

the name local.bin.

<SwitchA> scp 192.168.0.1 get remote.bin local.bin

Username: client001

Connected to 192.168.0.1 ...

The Server is not authenticated. Continue? [Y/N]:y

Do you want to save the server public key? [Y/N]:n

Enter password:

18471 bytes transfered in 0.001 seconds.