R211x-HP Flexfabric 11900 Security Configuration Guide

# Enable 802.1X on port Ten-GigabitEthernet 1/0/1.

[Device] interface ten-gigabitethernet 1/0/1

[Device-Ten-GigabitEthernet1/0/1] dot1x

[Device-Ten-GigabitEthernet1/0/1] quit

# Enable MAC-based access control on the port. By default, the access control method is MAC

based.

[Device] interface ten-gigabitethernet 1/0/1

[Device-Ten-GigabitEthernet1/0/1] dot1x port-method macbased

# Specify aabbcc.net as the mandatory domain.

[Device-Ten-GigabitEthernet1/0/1] dot1x mandatory-domain aabbcc.net

Verifying the configuration

# Use the display dot1x interface ten-gigabitethernet 1/0/1 command to verify the 802.1X

configuration.

# After an 802.1X user passes authentication, use the display dot1x sessions command to view the user

connection information.