HP FlexFabric 11900 Switch Series TRILL Command Reference Part number: 5998-5284 Software version: Release 2111 and later Document version: 6W100-20140110
Legal and notice information © Copyright 2014 Hewlett-Packard Development Company, L.P. No part of this documentation may be reproduced or transmitted in any form or by any means without prior written consent of Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.
Contents TRILL commands···························································································································································· 1 auto-cost enable························································································································································ 1 display trill adjacent-table ··································································································································
Subscription service ·············································································································································· 44 Related information ························································································································································ 44 Documents ······························································································································································
TRILL commands auto-cost enable Use auto-cost enable to enable automatic link cost calculation for TRILL ports. Use undo auto-cost enable to disable automatic link cost calculation for TRILL ports. Syntax auto-cost enable undo auto-cost enable Default Automatic link cost calculation is enabled for TRILL ports.
Syntax display trill adjacent-table [ count | nickname nickname interface interface-type interface-number ] Views Any view Predefined user roles network-admin network-operator mdc-admin mdc-operator Parameters count: Displays the number of entries. nickname nickname: Displays information about the RB specified by its nickname. The nickname is a hexadecimal number in the range of 0x1 to 0xFFFE. If no RB is specified, the command displays information about all RBs.
Predefined user roles network-admin network-operator mdc-admin mdc-operator Examples # Display brief TRILL information. display trill brief Network entity: 00.00a0.fc00.5806.
Field Description LSP-max-age LSP maximum age (in seconds). LSP-refresh LSP refresh interval (in seconds). Interval between SPFs Maximum SPF calculation interval (in milliseconds), minimum SPF calculation interval (in milliseconds), and SPF calculation incremental interval (in milliseconds). display trill fib Use display trill fib to display the TRILL FIB.
Field Description NextHop Nickname of the next hop RB. Interface Outgoing port of frames. Total number of TRILL FIB destinations Number of destination RBs in the TRILL FIB. Total number of TRILL FIB entries Number of entries in the TRILL FIB. display trill graceful-restart status Use display trill graceful-restart status to display GR status information about TRILL.
Field Description Restart phase: Restart phase • • • • • Finish—GR is complete. LSDB synchronization—T2 synchronization phase. LSDB generation—LSP generation phase. MCS synchronization—Layer 2 multicast data synchronization phase. SPF—Route calculation phase. Restart interval Restart interval (in seconds). T3 remaining time Remaining time of the T3 timer (in seconds). The initial value is 65535 seconds, and is updated according to the remaining time in the RA packet.
Examples # Display TRILL information about all interfaces. display trill interface Interface: Ten-GigabitEthernet1/0/1 Protocol state: UP Nickname: 0x0001 MTU: 9198 DRB: Yes Designated VLAN: 1000 Link type: Access CSNP timer: 10s Hello timer: 3s Hello multiplier: 3 LSP timer: 10ms LSP transmit-throttle count: 5 Cost: 16777214 AVF inhibited timer: 30s Priority: 64 Active AVF: 1 Inhibited AVF: None Table 5 Command output Field Description State of TRILL: Protocol state • UP. • DOWN.
Field Description AVF inhibited time Inhibition time, in seconds. Priority DRB priority. Active AVF VLANs for which the RB is specified as the AVF by the DRB on the port. None indicates that the RB is not specified as the AVF for any VLAN. Inhibited AVF VLANs whose AVFs are inhibited on the port. None indicates that no such VLAN exists on the port. display trill lsdb Use display trill lsdb to display TRILL link state database (LSDB) information.
Length: 78 Overload: 0 Source: 00a0.fc00.5806.00 TRILL version: 0x00 Nickname: Nickname: 0xfa1b Priority: 64 Tree-root priority: 32768 Trees: Compute trees number: 1 Max compute trees number: 15 Used trees number: 1 Tree identifiers: 0x899b Trees used identifiers: 0x899b Interested VLANs: Start: 4, End: 4, M4: 0, M6: 0 Start: 5, End: 6, M4: 1, M6: 0 Neighbor: ID: 00e0.fc58.123a.
Field Description TRILL distribution tree computation information about the originating RB: • Compute trees number—Number of TRILL distribution trees that the RB wants all RBs to compute. Trees • Max compute trees number—Maximum TRILL distribution trees that the RB can compute. • Used trees number—Number of TRILL distribution trees to use when the RB is an ingress RB.
local-entry: Displays information about local ingress entries. The frames sent out of the ports in the local ingress entries do not need the TRILL encapsulation. remote-entry: Displays information about remote ingress entries. The frames sent out of the ports in the remote ingress entries need the TRILL encapsulation. Usage guidelines If neither local-entry or remote-entry is specified, this command displays information about local and remote ingress entries.
mdc-admin mdc-operator Parameters nickname nickname: Displays information about the RB specified by its nickname. The nickname is a hexadecimal number in the range of 0x1 to 0xFFFE. If no RB is specified, the command displays information about all RBs. prune-entry: Displays information about pruned entries. If this keyword is not specified, the command displays information about all entries. rpf-entry: Displays information about RPF entries.
Field Description InNickName Nickname of the ingress RB of the entry. VLAN ID VLAN ID of the entry. MAC address MAC address of the entry. Entry type: Flag Port/Ports • Egress—Egress entries. • Transit—Transit entries. • Egress/Transit—Both transit and egress entries. Ports of the entry.
# Display the TRILL multicast routing table information for the TRILL distribution tree rooted at the RB whose nickname is 0x899B. display trill multicast-route tree-root 899b Root: 0x899b LocalRcvFlag: True List of VLANs: 1 to 10, 13, 40, 60 to 85, 200, 1001 List of outgoing ports: XGE1/0/1 XGE1/0/2 XGE1/0/3 XGE1/0/4 # Display the TRILL multicast routing table information for the TRILL distribution tree rooted at the RB whose nickname is 0x899B in VLAN 1.
Table 9 Command output Field Description Root Nickname of the RB acting as the root bridge of the TRILL distribution tree. VLAN ID of the VLAN. Whether the root bridge is valid: • Invalid. • Valid. Flag Local receiving flag: • False—The local end does not de-encapsulate the TRILL frame. • True—The local end de-encapsulates the TRILL frame and forwards LocalRcvFlag the frame. List of outgoing ports Outgoing port list. None indicates that no outgoing port exists. List of VLANs VLAN list.
Field Description MAC address MAC address of the next hop. Interface Outgoing port. display trill peer Use display trill peer to display the TRILL neighbor statistics. Syntax display trill peer [ interface interface-type interface-number ] Views Any view Predefined user roles network-admin network-operator mdc-admin mdc-operator Parameters interface interface-type interface-number: Specifies an interface by its type and number.
Field Description Holdtime Remaining holding time (in seconds) of the adjacency. If no Hello frame is received from a neighbor within the holding time, the neighbor is considered invalid. When a Hello frame is received from a neighbor within the holding time, the holding time is restarted. DRB priority DRB priority of the neighbor port. Nickname Nickname of the neighbor. Uptime Time for which the adjacency has been held.
Table 12 Command output Field Description Ingress-nickname Nickname of the ingress RB. Expected-rcv-ports Expected incoming port. display trill unicast-route Use display trill unicast-route to display the TRILL unicast routing table. Syntax display trill unicast-route [ nickname nickname ] [ verbose ] Views Any view Predefined user roles network-admin network-operator mdc-admin mdc-operator Parameters nickname nickname: Displays information about the RB specified by its nickname.
Table 13 Command output Field Description Destination Nickname of the destination RB. Interface Outgoing port. NextHop Nickname of the next hop RB. NextHop count Number of next hops. Neighbor ID ID of the neighbor associated with the next hop. graceful-restart Use graceful-restart to enable GR for TRILL. Use undo graceful-restart to disable GR for TRILL. Syntax graceful-restart undo graceful-restart Default GR is disabled for TRILL.
Views TRILL view Predefined user roles network-admin mdc-admin Parameters interval: Specifies the GR restart interval for TRILL, in the range of 30 to 1800 seconds. Examples # Configure the restart interval as 120 seconds for TRILL. system-view [Sysname] trill [Sysname-trill] graceful-restart interval 120 log-peer-change enable Use log-peer-change enable to enable logging of TRILL neighbor changes. Use undo log-peer-change enable to disable logging of TRILL neighbor changes.
Syntax lsp-length originate size undo lsp-length originate Defaults The maximum length of an LSP originated by an RB is 1458 bytes. Views TRILL view Predefined user roles network-admin mdc-admin Parameters size: Specifies the maximum length of an LSP originated by an RB. The value range for this argument is 512 to 16384 bytes. Usage guidelines The maximum length of an LSP originated by an RB cannot be greater than the maximum length of an LSP that can be received by an RB.
mdc-admin Parameters size: Specifies the maximum length of an LSP that can be received by an RB. The value range for this argument is 512 to 16384 bytes. Usage guidelines The maximum length of an LSP that can be received by an RB cannot be smaller than the maximum length of an LSP originated by an RB. Otherwise, the system displays error messages. Examples # Set the maximum length of an LSP that can be received by an RB to 1024 bytes.
multicast-ecmp enable Use multicast-ecmp enable to enable multicast Equal Cost Multiple Path (ECMP). Use undo multicast-ecmp enable to disable multicast ECMP. Syntax multicast-ecmp enable undo multicast-ecmp enable Default Multicast ECMP is disabled. Views TRILL view Predefined user roles network-admin mdc-admin Usage guidelines TRILL distribution trees support ECMP, also known as multicast ECMP.
Predefined user roles network-admin mdc-admin Parameters nickname: Specifies the nickname for an RB. A nickname is a hexadecimal number in the range of 0x1 to 0xFFBF. priority: Specifies the priority for an RB to hold a nickname. The value range for the priority is 129 to 255, and the default priority is 192. Usage guidelines The nickname of an RB is the address of the RB in the TRILL network.
undo set-overload Defaults The Overload bit of an LSP is not set. Views TRILL view Predefined user roles network-admin mdc-admin Parameters timeout: Specifies the lifetime of the set Overload bit. The value range for this argument is 5 to 3600 seconds. By default, the lifetime of the set Overload bit is infinite, which means that the Overload bit continues being set until it is cleared. Usage guidelines Do not configure the command on the root bridge of a TRILL distribution tree.
Usage guidelines TRILL uses the IS-IS MIB to provide the TRILL object management function for NMS. Because the MIB objects defined in the IS-IS MIB are single-instance management objects, NMS cannot manage IS-IS and TRILL at the same time. According to the management for multiple OSPF instances defined in RFC 4750, you can set a context name for the SNMP object for managing TRILL. In this way, the SNMP requests for managing IS-IS and the SNMP requests for managing TRILL from NMS can be distinguished.
lsp-size-exceeded: Specifies notifications about oversized LSPs that result in flooding failures. max-seq-exceeded: Specifies notifications about LSPs with exceeded serial numbers. maxarea-mismatch: Specifies notifications about mismatches in maximum area address values. new-drb: Specifies notifications sent about becoming new DRBs. own-lsp-purge: Specifies notifications about attempts to purge local LSPs. protocol-support: Specifies notifications about supported protocol mismatches.
mdc-admin mdc-operator Parameters slot slot-number: Specifies an LSU1TGS48SF0 card by its slot number. (In standalone mode.) chassis chassis-number slot slot-number: Specifies an LSU1TGS48SF0 card. The chassis-number argument represents the ID of the IRF member device. The slot-number argument specifies the slot where the LSU1TGS48SF0 card resides. (In IRF mode.
Examples # Configure the system ID as 1010.1020.1030 for the RB. system-view [Sysname] trill [Sysname-trill] system-id 1010.1020.1030 timer lsp-max-age Use timer lsp-max-age to configure the maximum age of LSPs. Use undo timer lsp-max-age to restore the default. Syntax timer lsp-max-age time undo timer lsp-max-age Default The LSP maximum age is 1200 seconds.
timer lsp-refresh Use timer lsp-refresh to configure the LSP refresh interval. Use undo timer lsp-refresh to restore the default. Syntax timer lsp-refresh time undo timer lsp-refresh Default The LSP refresh interval is 900 seconds. Views TRILL view Predefined user roles network-admin mdc-admin Parameters time: Specifies the LSP refresh interval in the range of 1 to 65534 seconds.
Defaults The maximum SPF calculation interval is 10 seconds, the minimum SPF calculation interval is 10 milliseconds, and the SPF calculation incremental interval is 20 milliseconds. Views TRILL view Predefined user roles network-admin mdc-admin Parameters maximum-interval: Specifies the maximum SPF calculation interval in the range of 1 to 120 seconds. minimum-interval: Specifies the minimum SPF calculation interval in the range of 10 to 60000 milliseconds.
Predefined user roles network-admin mdc-admin Parameters priority: Specifies the priority for an RB to be a TRILL distribution tree root, in the range of 1 to 65535. A higher priority value indicates a higher priority. Examples # Set the priority for the RB to be a TRILL distribution tree root to 65535. system-view [Sysname] trill [Sysname-trill] tree-root priority 65535 trees calculate Use trees calculate to set the number of TRILL distribution trees that the RB wants all RBs to compute.
Syntax trill undo trill Default TRILL is disabled globally. Views System view Predefined user roles network-admin mdc-admin Examples # Enable TRILL globally and enter TRILL view. system-view [Sysname] trill [Sysname-trill] trill announcing-vlan Use trill announcing-vlan to configure the announcing VLANs. Use undo trill announcing-vlan to restore the default.
VLANs in the following set for sending Hello frames: enabled VLANs ∩ (designated VLAN ∪ (announcing VLANs ∩ forwarding VLANs)). The concepts and symbols used in this section are explained as follows: • Enabled VLAN—VLAN enabled on the port. • Forwarding VLAN—VLANs for which an RBridge port is appointed VLAN forwarder on the port. • ∩ and ∪—Set operation symbols. ∩ indicates set-theoretic intersection, and ∪ indicates set-theoretic union.
Usage guidelines The link cost of a TRILL port can be automatically calculated by the system or manually configured: • When a link cost is manually configured, the manually configured link cost takes effect whether or not automatic link cost calculation is enabled. • When a link cost is not manually configured and automatic link cost calculation is enabled, the automatically calculated link cost takes effect.
Configuration in Layer 2 Ethernet interface view takes effect on only the current port. Configuration in Layer 2 aggregate interface view takes effect on the current interface and its member ports. Configuration on the member port of an aggregate interface takes effect after the member port leaves the aggregation group. Examples # Configure VLAN 2 as a designated VLAN.
trill enable Use trill enable to enable TRILL on a port. Use undo trill enable to disable TRILL on a port. Syntax trill enable undo trill enable Default TRILL is disabled on a port. Views Layer 2 Ethernet interface view, Layer 2 aggregate interface view Predefined user roles network-admin mdc-admin Usage guidelines To enable TRILL on a port, first enable TRILL globally. Enable or disable TRILL on all ports in a VLAN, so that the ports in a VLAN have the same TRILL status (enabled or disabled).
trill link-type Use trill link-type to configure the link type of a TRILL port. Use undo trill link-type to restore the default. Syntax trill link-type { access [ alone ] | hybrid | trunk } undo trill link-type Default The link type of a TRILL port is access without the alone attribute. Views Layer 2 Ethernet interface view, Layer 2 aggregate interface view Predefined user roles network-admin mdc-admin Parameters access [ alone ] : Configures the link type as access.
undo trill timer avf-inhibited Default The inhibition time is 30 seconds. Views Layer 2 Ethernet interface view, Layer 2 aggregate interface view Predefined user roles network-admin mdc-admin Parameters time: Specifies the inhibition time in the range of 0 to 30 seconds. Usage guidelines An RB that acts as the AVF of a VLAN guarantees that frames from the VLAN have only one incoming port or one outgoing port along a link. When other RBs receive frames from the VLAN, they do not perform any processing.
mdc-admin Parameters interval: Specifies the CSNP interval in the range of 1 to 600 seconds. Usage guidelines On a broadcast network, the DRB advertises CSNPs at the CSNP interval to perform network-wide LSDB synchronization. A CSNP records all LSP digests of the local LSDB. When an RB receives a CSNP, the RB compares the CSNP against the local LSDB to verify whether some LSPs are aged out or missing.
any Hello frame from the RB before the adjacency holding time expires, it removes the TRILL adjacency with the RB. The product of the Hello interval and the Hello multiplier cannot exceed 65535. This command sets the Hello interval for the RB. The Hello interval of the DRB is 1/3 of the Hello interval of the RB, so that the DRB failures can be quickly detected. Configuration in Layer 2 Ethernet interface view takes effect on only the current port.
Configuration in Layer 2 Ethernet interface view takes effect on only the current port. Configuration in Layer 2 aggregate interface view takes effect on the current interface and its member ports. Configuration on the member port of an aggregate interface takes effect after the member port leaves the aggregation group. Examples # Set the number of invalid Hello frames to 6 on Ten-GigabitEthernet 1/0/1.
Examples # Set the minimum LSP interval to 500 milliseconds and the maximum number of LSPs transmitted per time to 10 on port Ten-GigabitEthernet 1/0/1.
Support and other resources Contacting HP For worldwide technical support information, see the HP support website: http://www.hp.
Conventions This section describes the conventions used in this documentation set. Command conventions Convention Description Boldface Bold text represents commands and keywords that you enter literally as shown. Italic Italic text represents arguments that you replace with actual values. [] Square brackets enclose syntax choices (keywords or arguments) that are optional. { x | y | ... } Braces enclose a set of required syntax choices separated by vertical bars, from which you select one.
Network topology icons Represents a generic network device, such as a router, switch, or firewall. Represents a routing-capable device, such as a router or Layer 3 switch. Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that supports Layer 2 forwarding and other Layer 2 features. Represents an access controller, a unified wired-WLAN module, or the switching engine on a unified wired-WLAN switch. Represents an access point.
Index ADGLMNRSTW A R auto-cost enable,1 reset trill,24 D S display trill adjacent-table,1 set-overload,24 display trill brief,2 snmp context-name,25 display trill fib,4 snmp-agent trap enable trill,26 display trill graceful-restart status,5 Subscription service,44 display trill interface,6 switch-mode port-extender,27 display trill lsdb,8 system-id,28 display trill mfib ingress,10 T display trill mfib transit,11 timer lsp-max-age,29 display trill multicast-route,13 timer lsp-refresh,3
