R211x-HP Flexfabric 11900 TRILL Configuration Guide

[RB1-trill] quit

[RB1] interface ten-gigabitethernet 1/0/1

[RB1-Ten-GigabitEthernet1/0/1] trill enable

[RB1-Ten-GigabitEthernet1/0/1] quit

# Configure RB 2 through RB 5 in the same way RB 1 is configured.

2. Configure the uplink port of access layer devices:

# Enable TRILL on uplink port Ten-GigabitEthernet 1/0/2 through Ten-GigabitEthernet 1/0/5 of

RB 1, and configure these ports as trunk ports.

[RB1] interface ten-gigabitethernet 1/0/2

[RB1-Ten-GigabitEthernet1/0/2] trill enable

[RB1-Ten-GigabitEthernet1/0/2] trill link-type trunk

[RB1-Ten-GigabitEthernet1/0/2] quit

[RB1] interface ten-gigabitethernet 1/0/3

[RB1-Ten-GigabitEthernet1/0/3] trill enable

[RB1-Ten-GigabitEthernet1/0/3] trill link-type trunk

[RB1-Ten-GigabitEthernet1/0/3] quit

[RB1] interface ten-gigabitethernet 1/0/4

[RB1-Ten-GigabitEthernet1/0/4] trill enable

[RB1-Ten-GigabitEthernet1/0/4] trill link-type trunk

[RB1-Ten-GigabitEthernet1/0/4] quit

[RB1] interface ten-gigabitethernet 1/0/5

[RB1-Ten-GigabitEthernet1/0/5] trill enable

[RB1-Ten-GigabitEthernet1/0/5] trill link-type trunk

[RB1-Ten-GigabitEthernet1/0/5] quit

# Configure RB 2 through RB 5 in the same way RB 1 is configured.

3. Configure the downlink ports of distribution layer devices:

# Enable TRILL globally on RB 6, enable TRILL on downlink port Ten-GigabitEthernet 1/0/1

through Ten-GigabitEthernet 1/0/5 of RB 6, and configure these ports as trunk ports.

<RB6> system-view

[RB6] trill

[RB6-trill] quit

[RB6] interface ten-gigabitethernet 1/0/1

[RB6-Ten-GigabitEthernet1/0/1] trill enable

[RB6-Ten-GigabitEthernet1/0/1] trill link-type trunk

[RB6-Ten-GigabitEthernet1/0/1] quit

[RB6] interface ten-gigabitethernet 1/0/2

[RB6-Ten-GigabitEthernet1/0/2] trill enable

[RB6-Ten-GigabitEthernet1/0/2] trill link-type trunk

[RB6-Ten-GigabitEthernet1/0/2] quit

[RB6] interface ten-gigabitethernet 1/0/3

[RB6-Ten-GigabitEthernet1/0/3] trill enable

[RB6-Ten-GigabitEthernet1/0/3] trill link-type trunk

[RB6-Ten-GigabitEthernet1/0/3] quit

[RB6] interface ten-gigabitethernet 1/0/4

[RB6-Ten-GigabitEthernet1/0/4] trill enable

[RB6-Ten-GigabitEthernet1/0/4] trill link-type trunk

[RB6-Ten-GigabitEthernet1/0/4] quit