R21xx-HP FlexFabric 11900 ACL and QoS Command Reference

9
ACL 2001, Hardware-count
From 2012-11-16 09:07:29 to 2012-11-16 09:14:03
rule 0 permit
Totally 0 packets, 0% permitted
Totally 0 packets, 0% denied
Default action: Deny
Table 3 Command output
Field Descri
p
tion
Interface Interface to which the ACL applies.
In-bound policy ACL used for filtering incoming traffic.
Out-bound policy ACL used for filtering outgoing traffic.
ACL 2001 IPv4 basic ACL 2001 has been successfully applied.
Hardware-count Successfully enables counting ACL rule matches.
From 2012-11-16 09:07:29 to
2012-11-16 09:14:03
Start time and end time of the statistics.
Totally 0 packets, 0% permitted
Number of packets permitted by the ACL, and the ratio of
permitted packets to all packets.
Totally 0 packets, 0% denied
Number of packets denied by the ACL, and the ratio of denied
packets to all packets.
Default action
Default action for packets that do not match any ACL. If the
default action is deny, this field displays Deny. If the default action
is permit, this field is blank.
Related commands
reset packet-filter statistics
display packet-filter statistics sum
Use display packet-filter statistics sum to display accumulated packet filtering ACL statistics.
Syntax
display packet-filter statistics sum { inbound | outbound } [ ipv6 ] { acl-number | name acl-name }
[ brief ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
inbound: Displays the statistics in the inbound direction.
outbound: Displays the statistics in the outbound direction.