R21xx-HP FlexFabric 11900 ACL and QoS Command Reference

12
In-bound policy:
ACL 2001, Hardware-count
rule 0 permit source 2.2.2.2 0
rule 5 permit source 1.1.1.1 0
Default action: Deny
Table 5 Command output
Field Descri
p
tion
Interface Interface to which the ACL applies.
In-bound policy ACL used for filtering incoming traffic.
Out-bound policy ACL used for filtering outgoing traffic.
ACL 2001 IPv4 basic ACL 2001 has been successfully applied.
Hardware-count Successfully enables counting ACL rule matches.
Default action
Default action for packets that do not match any ACL. If the
default action is deny, this field displays Deny. If the default
action is permit, this field is blank.
display qos-acl resource
Use display qos-acl resource to display QoS and ACL resource usage.
Syntax
In standalone mode:
display qos-acl resource [ slot slot-number ]
In IRF mode:
display qos-acl resource [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies a card by its slot number. If no slot is specified, the command displays ACL
QoS and ACL resource usage on all cards. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number
argument represents the ID of the IRF member device, and the slot-number argument represents the
number of the slot that holds the card. If no card is specified, the command displays QoS and ACL
resource usage on member devices of the IRF fabric. (In IRF mode.)
Examples
# Display QoS and ACL resource usage.
<Sysname> display qos-acl resource