R21xx-HP FlexFabric 11900 ACL and QoS Command Reference

19
<Sysname> system-view
[Sysname] acl number 4000
[Sysname-acl-ethernetframe-4000] rule permit type 0806 ffff
[Sysname-acl-ethernetframe-4000] rule deny type 8035 ffff
Related commands
• acl
• display acl
• step
• time-range
rule (IPv4 advanced ACL view)
Use rule to create or edit an IPv4 advanced ACL rule.
Use undo rule to delete an entire IPv4 advanced ACL rule or some attributes in the rule.
Syntax
rule [ rule-id ] { deny | permit } protocol [ { { ack ack-value | fin fin-value | psh psh-value | rst rst-value
| syn syn-value | urg urg-value } * | established } | counting | destination { dest-address dest-wildcard
| any } | destination-port operator port1 [ port2 ] | { dscp dscp | { precedence precedence | tos tos }
* } | fragment | icmp-type { icmp-type [ icmp-code ] | icmp-message } | logging | source
{ source-address source-wildcard | any } | source-port operator port1 [ port2 ] | time-range
time-range-name | vpn
-instance vpn-instance-name ] *
undo rule rule-id [ { { ack | fin | psh | rst | syn | urg } * | established } | counting | destination |
destination-port | { dscp | { precedence | tos } * } | fragment | icmp-type | logging | source |
source-port | time-range | vpn-instance ] *
Default
An IPv4 advanced ACL does not contain any rule.
Views
IPv4 advanced ACL view
Predefined user roles
network-admin
Parameters
rule-id: Specifies a rule ID in the range of 0 to 65534. If no rule ID is provided when you create an ACL
rule, the system automatically assigns it a rule ID. This rule ID takes the nearest higher multiple of the
numbering step to the current highest rule ID, starting from 0. For example, if the rule numbering step is
5 and the current highest rule ID is 28, the rule is numbered 30.
deny: Denies matching packets.
permit: Allows matching packets to pass.
protocol: Protocol carried by IPv4. It can be a number in the range of 0 to 255, or in words, gre (47),
icmp (1) , igmp (2), ip, ipinip (4), ospf (89), tcp (6), or udp (17) . Table 7 de
scribes the parameters that you
can specify regardless of the value that the protocol argument takes.