R21xx-HP FlexFabric 11900 ACL and QoS Command Reference
25
[Sysname-acl-basic-2000] rule deny source any
Related commands
• acl
• acl logging interval
• display acl
• step
• time-range
rule (IPv6 advanced ACL view)
Use rule to create or edit an IPv6 advanced ACL rule.
Use undo rule to delete an entire IPv6 advanced ACL rule or some attributes in the rule.
Syntax
rule [ rule-id ] { deny | permit } protocol [ { { ack ack-value | fin fin-value | psh psh-value | rst rst-value
| syn syn-value | urg urg-value } * | established } | counting | destination { dest-address dest-prefix |
dest-address/dest-prefix | any } | destination-port operator port1 [ port2 ] | dscp dscp | flow-label
flow-label-value | fragment | icmp6-type { icmp6-type icmp6-code | icmp6-message } | logging |
routing [ type routing-type ] | source { source-address source-prefix | source-address/source-prefix |
any } | source-port operator port1 [ port2 ] | tim
e-range time-range-name | vpn-instance
vpn-instance-name ] *
undo rule rule-id [ { { ack | fin | psh | rst | syn | urg } * | established } | counting | destination |
destination-port | dscp | flow-label | fragment | icmp6-type | logging | routing | source |
source-port | time-range | vpn-instance ] *
Default
An IPv6 advanced ACL does not contain any rule.
Views
IPv6 advanced ACL view
Predefined user roles
network-admin
Parameters
rule-id: Specifies a rule ID in the range of 0 to 65534. If no rule ID is provided when you create an ACL
rule, the system automatically assigns it a rule ID. This rule ID takes the nearest higher multiple of the
numbering step to the current highest rule ID, starting from 0. For example, if the rule numbering step is
5 and the current highest rule ID is 28, the rule is numbered 30.
deny: Denies matching packets.
permit: Allows matching packets to pass.
protocol: Matches protocol carried over IPv6. It can be a number in the range of 0 to 255, or in words,
gre (47), icmpv6 (58), ipv6, ipv6-ah (51), ipv6-esp (50), ospf (89), tcp (6), or udp (17) . Table 11
de
scribes the parameters that you can specify regardless of the value that the protocol argument takes.