R21xx-HP FlexFabric 11900 ACL and QoS Command Reference

31
<Sysname> system-view
[Sysname] acl ipv6 number 2000
[Sysname-acl6-basic-2000] rule permit source 1001:: 16
[Sysname-acl6-basic-2000] rule permit source 3124:1123:: 32
[Sysname-acl6-basic-2000] rule permit source fe80:5060:1001:: 48
[Sysname-acl6-basic-2000] rule deny source any
Related commands
• acl
• acl logging interval
• display acl
• step
• time-range
rule comment
Use rule comment to add a comment about an existing ACL rule or edit its comment to make the rule easy
to understand.
Use undo rule comment to delete an ACL rule comment.
Syntax
rule rule-id comment text
undo rule rule-id comment
Default
An ACL has not rule comment.
Views
IPv4 basic/advanced ACL view, IPv6 basic/advanced ACL view, Ethernet frame header ACL view,
Predefined user roles
network-admin
Parameters
rule-id: Specifies an ACL rule ID in the range of 0 to 65534. The ACL rule must already exist.
text: Specifies a comment about the ACL rule, a case-sensitive string of 1 to 127 characters.
Examples
# Create a rule for IPv4 basic ACL 2000, and add a comment about the rule.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule 0 deny source 1.1.1.1 0
[Sysname-acl-basic-2000] rule 0 comment This rule is used on Ten-GigabitEthernet 1/0/1.
Related commands
display acl