R21xx-HP FlexFabric 11900 ACL and QoS Command Reference

34
Table 15 Command output
Field Descri
p
tion
Classifier Traffic class name and its match criteria.
Operator
Match operator you set for the traffic class. If the operator is AND, the traffic class
matches the packets that match all its match criteria. If the operator is OR, the traffic class
matches the packets that match any of its match criteria.
Rule(s) Match criteria.
if-match
Use if-match to define a match criterion.
Use undo if-match to delete a match criterion.
Syntax
if-match match-criteria
undo if-match match-criteria
Default
No match criterion is configured.
Views
Traffic class view
Predefined user roles
network-admin
Parameters
match-criteria: Specifies a match criterion. Table 16 shows the available match criteria.
Table 16 Available match criteria
O
p
tion Descri
p
tion
acl [ ipv6 ] { acl-number | name
acl-name }
Matches an ACL.
The acl-number argument is in the range of 2000 to 3999 for an IPv4 ACL,
2000 to 3999 for an IPv6 ACL, and 4000 to 4999 for an Ethernet frame
header ACL.
The acl-name argument is a case-insensitive string of 1 to 63 characters,
which must start with an English letter, and to avoid confusion, it cannot be
all.
any Matches all packets.
control-plane protocol
protocol-name&<1-8>
Matches the control plane protocols.
The protocol-name-list&<1-8> argument is a list of system-defined control
plane protocols. &<1-8> indicates that you can enter up to eight
system-defined control plane protocols.
control-plane protocol-group
protocol-group-name
Matches the control plane protocol group.
The protocol-group-name argument can be critical, important, monitor, or
normal.