R21xx-HP FlexFabric 11900 ACL and QoS Command Reference

Usage guidelines

If no direction is specified, this command displays information about both inbound and outbound global

QoS policies.

If no slot number is specified, this command displays the global QoS policies on the main processing unit.

(In standalone mode.)

If no slot or IRF member ID is specified, this command displays the global QoS policies applied to the

global active MPU of the IRF fabric. (In IRF mode.)

Examples

# Display information about the inbound global QoS policy.

<Sysname> display qos policy global inbound

Direction: Inbound

Policy: 1

Classifier: 1

Operator: AND

Rule(s) : If-match acl 2000

Behavior: 1

Marking:

Remark dscp 3

Committed Access Rate:

CIR 128 (kbps), CBS 8192 (Bytes), EBS 512 (Bytes)

Green action: pass

Yellow action: pass

Red action: discard

Green packets: 0(Packets)

Red packets: 0(Packets)

Classifier: 2

Operator: AND

Rule(s) : If-match protocol ipv6

Behavior: 2

Accounting enable:

0 (Packets)

Filter enable: Permit

Marking:

Remark dot1p 1

Table 21 Command output

Field Descri

tion

Direction Direction (inbound or outbound ) in which the QoS policy is applied.

Green packets Statistics about green packets.

Red packets Statistics about red packets.

For the output description, see Table 15 and Table 17.