R21xx-HP FlexFabric 11900 ACL and QoS Command Reference

60
Classifier: 2
Operator: AND
Rule(s) : If-match protocol ipv6
Behavior: 2
Accounting enable:
0 (Packets)
Filter enable: Permit
Marking:
Remark dot1p 1
Table 22 Command output
Field Descri
p
tion
Direction Direction in which the QoS policy is applied to the interface.
Green packets Traffic statistics for green packets.
Red packets Traffic statistics for red packets.
For the output description, see Table 15 and Table 17.
display qos vlan-policy
Use display qos vlan-policy to display information about QoS policies applied to VLANs.
Syntax
In standalone mode:
display qos vlan-policy { name policy-name | vlan [ vlan-id ] } [ slot slot-number ] [ inbound | outbound ]
In IRF mode:
display qos vlan-policy { name policy-name | vlan [ vlan-id ] } [ chassis chassis-number slot slot-number ]
[ inbound | outbound ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
name policy-name: Displays information about a QoS policy applied to VLANs. The policy-name
argument is a case-sensitive string of 1 to 31 characters.
vlan vlan-id: Displays information about the QoS policies applied to the VLAN specified by its ID.
inbound: Displays information about the QoS policy applied to the incoming traffic of the specified
VLAN.
outbound: Displays information about the QoS policy applied to the outgoing traffic of the specified
VLAN.
slot slot-number: Displays information about QoS policies applied to VLANs of the card specified by the
slot number. (In standalone mode.)