R21xx-HP FlexFabric 11900 ACL and QoS Command Reference

chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number

argument refers to the ID of the IRF member device, and the slot-number argument refers to the number

of the slot where the card resides. (In IRF mode.)

Examples

# (In standalone mode.) Clear the statistics of the QoS policy applied to the incoming traffic of the control

plane of card 3.

<Sysname> reset qos policy control-plane slot 3 inbound

# (In IRF mode.) Clear the statistics of the QoS policy applied in each direction of the control plane of

card 3 on IRF member 1.

<Sysname> reset qos policy control-plane chassis 1 slot 3

reset qos policy global

Use reset qos policy global to clear the statistics of a global QoS policy.

Syntax

reset qos policy global [ inbound | outbound ]

Views

User view

Predefined user roles

network-admin

Parameters

inbound: Clears the statistics of the global QoS policy applied to incoming traffic globally.

outbound: Clears the statistics of the global QoS policy applied to outgoing traffic globally.

Usage guidelines

If no direction is specified, this command clears the statistics of the global QoS policies in both directions.

Examples

# Clear the statistics of the global QoS policy applied to the incoming traffic globally.

<Sysname> reset qos policy global inbound

reset qos vlan-policy

Use reset qos vlan-policy to clear the statistics of the QoS policy applied in a certain direction of a

VLAN.