R21xx-HP FlexFabric 11900 ACL and QoS Command Reference

70
Syntax
qos map-table { dot1p-dp | dot1p-exp | dot1p-lp | dscp-dot1p| dscp-dp | dscp-dscp | exp-dot1p }
Views
System view
Predefined user roles
network-admin
Parameters
For the description of keywords, see Table 25.
Usage guidelines
The dscp-dot1p priority map does not take effect on interfaces on SF cards.
Examples
# Enter the 802.1p-drop priority map view.
<Sysname> system-view
[Sysname] qos map-table dot1p-dp
[Sysname-maptbl-dot1p-dp]
Related commands
• display qos map-table
• import
Port priority commands
qos priority
Use qos priority to change the port priority of an interface.
Use undo qos priority to restore the default.
Syntax
qos priority priority-value
undo qos priority
Default
The port priority is 0.
Views
Ethernet interface view
Predefined user roles
network-admin
Parameters
priority-value: Specifies the port priority value in the range of 0 to 7.
Examples
# Set the port priority of interface Ten-GigabitEthernet 1/0/1 to 2.