R21xx-HP FlexFabric 11900 ACL and QoS Command Reference

71
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] qos priority 2
Related commands
display qos trust interface
Priority trust mode commands
display qos trust interface
Use display qos trust interface to display priority trust mode and port priority information on an interface.
Syntax
display qos trust interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If no interface is specified,
this command displays priority trust mode and port priority information of all interfaces.
Examples
# Display the priority trust mode and port priority information of Ten-GigabitEthernet 1/0/1.
<Sysname> display qos trust interface Ten-GigabitEthernet 1/0/1
Interface: Ten-GigabitEthernet1/0/1
Port priority information
Port priority: 0
Port priority trust type: none
Table 27 Command output
Field Descri
p
tion
Interface Interface type and interface number.
Port priority Port priority set for the interface.
Port priority trust type Priority trust mode on the interface: dot1p or dscp.
qos trust
Use qos trust to configure the priority trust mode for an interface.
Use undo qos trust to restore the default priority trust mode.
Syntax
qos trust { dot1p | dscp }