R21xx-HP FlexFabric 11900 ACL and QoS Command Reference

75
Parameters
interface-type interface-number: Specifies an interface by its type and number. If no interface is specified,
this command displays the rate limit configuration on all the interfaces.
Examples
# Display the rate limit configuration on all the interfaces.
<Sysname> display qos lr interface
Interface : Ten-GigabitEthernet1/0/1
Direction: Inbound
CIR 12800 (kbps), CBS 800256 (Bytes)
Interface : Ten-GigabitEthernet1/0/2
Direction: Outbound
CIR 25600 (kbps), CBS 1600000 (Bytes)
Table 29 Command output
Field Descri
p
tion
Interface Interface type and interface number.
Direction Direction in which the rate limit configuration is applied: inbound or outbound.
CIR CIR in kbps.
CBS CBS in bytes, which specifies the depth of the token bucket for holding bursty traffic.
qos lr
Use qos lr to limit the rate of packets on the interface.
Use undo qos lr to remove the rate limit.
Syntax
qos lr { inbound | outbound } cir committed-information-rate [ cbs committed-burst-size ]
undo qos lr { inbound | outbound }
Default
Rate limit is not configured on an interface.
Views
Ethernet interface view
Predefined user roles
network-admin
Parameters
inbound: Limits the rate of incoming packets on the interface.
outbound: Limits the rate of outgoing packets on the interface.
cir committed-information-rate: Specifies the CIR in kbps. The value range for the
committed-information-rate argument is 8 to 10000000 for 10-GE interfaces and 8 to 40000000 for
40-GE interfaces. The configured value must be an integral multiple of 8.