R21xx-HP FlexFabric 11900 ACL and QoS Command Reference

78
Default
An interface uses the SP queuing algorithm.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Examples
# Enable SP queuing on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] qos sp
Related commands
display qos sp interface
WRR commands
display qos wrr interface
Use display qos wrr interface to display the WRR queuing configuration on an interface.
Syntax
display qos wrr interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If no interface is specified,
this command displays the WRR queuing configuration of all the interfaces.
Examples
# Display the WRR queuing configuration of Ten-GigabitEthernet 1/0/1.
<Sysname> display qos wrr interface ten-gigabitethernet 1/0/1
Interface: Ten-GigabitEthernet1/0/1
Output queue: Weighted Round Robin queuing
Queue ID Group Weight
-----------------------------------------
be sp NA
af1 1 2
af2 1 3
af3 1 4
af4 1 5