R21xx-HP FlexFabric 11900 ACL and QoS Command Reference

83
cs6 2 1 64
cs7 2 1 64
Table 33 Command output
Field Descri
p
tion
Interface Interface type and interface number.
Output queue Type of the current output queue.
Queue ID ID of a queue.
Group
Number of the group that holds the queue. By default, all queues are in
group 1.
Byte-count Byte-count scheduling weight of the queue.
Min-Bandwidth Minimum guaranteed bandwidth.
Related commands
qos wfq
qos bandwidth queue
Use qos bandwidth queue to set the minimum guaranteed bandwidth for a specified queue on an
interface.
Use undo qos bandwidth queue to restore the default.
Syntax
qos bandwidth queue queue-id min bandwidth-value
undo qos bandwidth queue queue-id
Default
The minimum guaranteed bandwidth is 64 kbps.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Parameters
queue-id: Queue ID in the range of 0 to 7.
min bandwidth-value: Sets the minimum guaranteed bandwidth (in kbps) for a queue when the interface
is congested. The value range for the bandwidth-value argument is 8 to 10000000 for 10-GE interfaces
and 8 to 40000000 for 40-GE interfaces.
Usage guidelines
You must use the qos wfq command to enable WFQ before you can configure this command on an
interface.
The queue-id argument can be either a number or a keyword. Table 32 sh
ows the number-keyword map.
Examples
# Set the minimum guaranteed bandwidth to 100 kbps for queue 0 on Ten-GigabitEthernet 1/0/1.