R21xx-HP FlexFabric 11900 ACL and QoS Configuration Guide

61
Ste
p
Command Remarks
6. Configure a priority
marking action.
• Set the DSCP value for packets:
remark [ green | red | yellow ] dscp
dscp-value
• Set the 802.1p priority for packets or
configure the inner-to-outer tag priority
copying function:
remark [ green | red | yellow ] dot1p
dot1p-value
remark dot1p customer-dot1p-trust
• Set the drop priority for packets:
remark drop-precedence
drop-precedence-value
• Set the IP precedence for packets:
remark ip-precedence ip-precedence-value
• Set the local precedence for packets:
remark [ green | red | yellow ]
local-precedence local-precedence-value
• Set the local QoS ID for packets:
remark qos-local-id local-id-value
• Set the CVLAN for packets:
remark customer-vlan-id vlan-id
• Set the SVLAN for packets:
remark service-vlan-id vlan-id
Use one or more of the
commands.
By default, no priority
marking action is
configured.
The switch supports local
QoS IDs in the range of 1
to 3999.
The remark
local-precedence, remark
qos-local-id, and remark
drop-precedence
commands apply to only
the incoming traffic.
7. Return to system view.
quit N/A
8. Create a QoS policy and
enter QoS policy view.
qos policy policy-name
By default, no QoS policy
is configured.
9. Associate the traffic class
with the traffic behavior in
the QoS policy.
classifier classifier-name behavior
behavior-name
By default, a traffic class
is not associated with a
traffic behavior.
10. Return to system view.
quit N/A
11. Apply the QoS policy.
• Applying the QoS policy to an interface
• Applying the QoS policy to a VLAN
• Applying the QoS policy globally
Choose one of the
application destinations
as needed.
By default, a QoS policy
is not applied.
12. (Optional.) Display the
priority marking
configuration.
display traffic behavior user-defined
[ behavior-name ]
Available in any view.