R21xx-HP FlexFabric 11900 ACL and QoS Configuration Guide

Configuration procedure

# Create basic ACL 2000, and configure a rule to match packets with source IP address 1.1.1.1.

<DeviceA> system-view

[DeviceA] acl number 2000

[DeviceA-acl-basic-2000] rule permit source 1.1.1.1 0

[DeviceA-acl-basic-2000] quit

# Create a traffic class named classifier_1, and use ACL 2000 as the match criterion in the traffic class.

[DeviceA] traffic classifier classifier_1

[DeviceA-classifier-classifier_1] if-match acl 2000

[DeviceA-classifier-classifier_1] quit

# Create a traffic behavior named behavior_1, and configure class-based accounting by packet count

as the action.

[DeviceA] traffic behavior behavior_1

[DeviceA-behavior-behavior_1] accounting packet

[DeviceA-behavior-behavior_1] quit

# Create a QoS policy named policy, and associate traffic class classifier_1 with traffic behavior

behavior_1 in the QoS policy.

[DeviceA] qos policy policy

[DeviceA-qospolicy-policy] classifier classifier_1 behavior behavior_1

[DeviceA-qospolicy-policy] quit

# Apply the QoS policy named policy to the incoming traffic of Ten-GigabitEthernet 1/0/1.

[DeviceA] interface ten-gigabitethernet 1/0/1

[DeviceA-Ten-GigabitEthernet1/0/1] qos apply policy policy inbound

[DeviceA-Ten-GigabitEthernet1/0/1] quit

# Display traffic statistics to verify the configuration.

[DeviceA] display qos policy interface ten-gigabitethernet 1/0/1

Interface: Ten-GigabitEthernet1/0/1

Direction: Inbound

Policy: policy

Classifier: classifier_1

Operator: AND

Rule(s) : If-match acl 2000

Behavior: behavior_1

Accounting enable:

28529 (Packets)