R21xx-HP FlexFabric 11900 EVB Command Reference

12
Examples
# Disable the MAC address learning function for S-channel 1/0/1:10.
<Sysname> system-view
[Sysname] interface s-channel 1/0/1:10
[Sysname-S-Channel1/0/1:10] evb mac-learning forbidden
Related commands
evb reflective-relay
evb reflective-relay
Use evb reflective-relay to enable the RR mode for an S-channel.
Use undo evb reflective-relay to disable the RR mode for an S-channel.
Syntax
evb reflective-relay
undo evb reflective-relay
Default
The RR mode for an S-channel is disabled.
Views
S-channel interface view
Predefined user roles
network-admin
Usage guidelines
EVB TLVs exchanged through LLDP allow an EVB station and EVB bridge to negotiate the use of reflective
relay (RR). If the EVB station requests the use of RR mode and the EVB bridge supports RR mode, the
bridge automatically enables RR mode for the S-channel and adds the corresponding command line to
the configuration file. You can also use this command to manually enable or disable the RR mode for an
S-channel.
Examples
# Enable the RR mode on S-channel 1/0/1:10.
<Sysname> system-view
[Sysname] interface s-channel 1/0/1:10
[Sysname-S-Channel1/0/1:10] evb reflective-relay
evb s-channel
Use evb s-channel to create an S-channel on a port.
Use undo evb s-channel to remove an S-channel on a port.
Syntax
evb s-channel channel-id service-vlan svlan-id
undo evb s-channel channel-id