R21xx-HP FlexFabric 11900 EVB Command Reference

15
Examples
# Configure the VDP keepalive exponent for Ten-GigabitEthernet 1/0/1 as 23.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] evb vdp timer keepalive exponent 23
evb vdp timer resource-wait-delay exponent
Use evb vdp timer resource-wait-delay exponent to configure a VDP resource-wait-delay exponent.
Use undo evb vdp timer resource-wait-delay exponent to restore the default.
Syntax
evb vdp timer resource-wait-delay exponent value
undo evb vdp timer resource-wait-delay exponent
Default
The VDP resource-wait-delay exponent is 20.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Parameters
value: Specifies a VDP resource-wait-delay exponent in the range of 15 to 31.
Usage guidelines
The value for VDP response-wait-delay time is expressed by the following equation:
VDP response-wait-delay time (seconds) = 2
VDP resource-wait-delay
× 10
—
5
For detailed values, see Table 8.
Table 8 Values for VD
P response-wait-delay time
VDP resource-wait-dela
y
ex
p
onent Calculated value (seconds) Result value (seconds)
15 0.32768 1
16 0.65536 1
17 1.31072 2
18 2.62144 3
19 5.24288 6
20 10.48576 11
21 20.97152 21
22 41.94304 42
23 83.88608 84
24 167.77216 168
25 335.54432 336