R21xx-HP FlexFabric 11900 EVB Command Reference

2
network-operator
Parameters
interface interface-type interface-number: Specifies a port by its type and number. If no interface is
specified, the command displays CDCP negotiation information for all ports with EVB enabled.
Examples
# Display CDCP negotiation information for all ports with EVB enabled.
<Sysname> display evb cdcp
---------------------------Ten-GigabitEthernet1/0/1---------------------
S-component capability : Local-supported/Remote-supported
Supported S-Channel numbers per-port : Local-167/Remote-167
SVID range : 2-4094
SCID requested from remote :
1, 2, 3, 4, 6, 10, 11, 12, 34, 35, 67
SCID/SVID pair list allocated :
<1, 1>, <2, 3>, <3, 2>, <4, 5>, <6, 4>,
<10, 9>, <11, 6>, <12, 7>, <34, 23>, <35, 35>,
<67, 67>
Table 1 Command output
Field Descri
p
tion
S-component capability
Port-mapping S-VLAN component capability on the EVB bridge
and the EVB station.
Supported S-channel numbers per-port S-channels supported by the EVB bridge and the EVB station.
SVID range SVID range on the EVB bridge.
SCID requested from remote SCIDs requested by the EVB station in ascending order.
SCID/SVID pair list allocated List of (SCID, SVID) pairs allocated by the EVB bridge.
display evb evb-tlv
Use display evb evb-tlv to display S-channel EVB TLV negotiation information.
Syntax
display evb evb-tlv [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies a port by its type and number. If no interface is
specified, the command displays EVB TLV negotiation information for all ports with EVB enabled.