R21xx-HP FlexFabric 11900 FCoE Command Reference

8
fcoe fcf-priority
Use fcoe fcf-priority to configure the FCF priority for the VFC interface.
Use undo fcoe fcf-priority to restore the default.
Syntax
fcoe fcf-priority priority
undo fcoe fcf-priority
Default
The default setting is 128.
Views
VFC interface view
Predefined user roles
network-admin
Parameters
priority: FCF priority for the VFC interface, in the range of 0 to 255. The smaller the value, the higher the
priority.
Usage guidelines
The VFC interface FCF priority is used in the fcf priority field in an unsolicited Discovery Advertisement.
An ENode selects the FCF switch with the highest priority from the FCF switches sending Discovery
Advertisements and sends a FLOGI request to it for login.
This command is effective only for VFC interfaces in F mode. You can configure this command on VFC
interfaces in E mode, but it does not take effect.
Examples
# Configure the FCF priority as 12 for interface VFC 1.
<Sysname> system-view
[Sysname] interface vfc 1
[Sysname-Vfc1] fcoe fcf-priority 12
fcoe fcmap
Use fcoe fcmap to configure an FC-MAP value.
Use undo fcoe fcmap to restore the default.
Syntax
fcoe fcmap fc-map
undo fcoe fcmap
Default
The default setting is 0x0EFC00.
Views
System view