R21xx-HP FlexFabric 11900 FCoE Command Reference

VSAN:1 FCID:0xec0200

Port-WWN(vendor): 10:00:00:5a:c9:28:c7:01

Node-WWN: 10:00:00:5a:c9:28:c7:01

Class: 3

Node-IP-addr: 192.168.0.52

FC4-types(FC4_features):

Symbolic-port-name:

Symbolic-node-name:

Port-type: 0x01(N)

Fabric-port-WWN: 22:0a:00:05:30:00:26:1e

Hard-addr: 0x000000

--- Total 2 entries ---

Table 10 Command output

Field Descri

tion

FCID FC address of the N_Port.

Type

Port type registered by a node with the switch:

• 0x00(Unidentified)—No port type is registered.

• 0x01(N)—N_Port, which directly connects to the fabric.

• 0x02(NL)—NL_Port, which connects to the fabric through an arbitrated

loop.

• 0x03(F/NL)—F_Port or NL_Port.

• 0x7f(Nx)—N_Port, NL_Port, or F_Port or NL_Port.

• 0x81(F)—F_Port, which connects to an N_Port.

• 0x82(FL)—FL_Port, which connects to an NL_Port.

• 0x84(E)—E_Port, which connects to an E_Port or B_Port.

• 0x85(B)—B_Port. The ports on a bridge connecting two E_Ports are called

B_Ports.

• 0xXX(Unknown)—Port types other than the preceding ones.

NOTE:

Only N_Ports and NL_Ports will be registered by a node.

Port-WWN(vendor) WWN of the N_Port (name of vendor).

Node-WWN WWN of the node.

Class Class of service.

Node-IP-addr IP address of the node.

FC4-types(FC4 features)

FC4 type (feature) entries:

• FC4 type—Includes FCP, LLC/SNAP, SW_ILS, SNMP, GS3, VI, and NPV.

• Feature—Includes supporting Initiator, Target, or Initiator/Target.

Symbolic-port-name Symbolic name, which is used for describing the N_Port.

Symbolic-node-name Symbolic name, which is used for describing the node.

Port-type Link type of the N_Port, which can be N representing point-to-point.

Fabric-port-WWN WWN of the F_Port.