R21xx-HP FlexFabric 11900 FCoE Command Reference

27
Syntax
fabric-name name
undo fabric-name
Default
The fabric name is null.
Views
VSAN view
Predefined user roles
network-admin
Parameters
name: Specifies a fabric name, in the format of xx:xx:xx:xx:xx:xx:xx:xx, where x is a hexadecimal
number.
Usage guidelines
An FCF switch supports assigning a fabric name to each VSAN, in the same format as the WWN (a
64-bit address). If the user does not configure a fabric name, the switch WWN is used as the fabric
name after FCoE is enabled.
You need to configure the fabric name only when a fabric is built statically. You must configure the same
fabric name on all switches in a VSAN. When a fabric is built dynamically, the WWN of the principal
switch is used as the fabric name.
Examples
# Specify a fabric name for the switch in VSAN 1.
<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] fabric-name 10:11:12:13:14:15:16:17
fc domain rcf-reject
Use fc domain rcf-reject to configure the interface to reject the ReConfigure Fabric (RCF) requests
received in the specified VSAN.
Use undo fc domain rcf-reject to restore the default.
Syntax
fc domain rcf-reject vsan vsan-id
undo fc domain rcf-reject vsan vsan-id
Default
An interface does not reject the received RCF requests.
Views
VFC interface view
Predefined user roles
network-admin