R21xx-HP FlexFabric 11900 FCoE Command Reference

30
Predefined user roles
network-admin
Parameters
value: Resource allocation timeout period in the range of 5000 to 10000 milliseconds.
Usage guidelines
The resource allocation timeout period can be configured in system view or VSAN view:
• The configuration made in system view takes effect on all VSANs. The configuration made in VSAN
view takes effect only on the current VSAN.
• If you configure the resource allocation timeout period globally and for the specified VSAN at the
same time, the configuration for the VSAN is given priority.
Examples
# Set the global resource allocation timeout period to 6000 milliseconds.
<Sysname> system-view
[Sysname] fc timer resource-allocation 6000
Related commands
timer resource-allocation
priority
Use priority to specify a priority for the switch in a specified VSAN.
Use undo priority to restore the default.
Syntax
priority value
undo priority
Default
The priority of a switch is 128 in each VSAN.
Views
VSAN view
Predefined user roles
network-admin
Parameters
value: Priority of the switch, in the range of 1 to 254.
Usage guidelines
The priority value for FCF switches is in the range of 1 to 254. The smaller the value, the higher the
priority. The FCF switch with the highest priority will become the principal switch.
The priority is configured on a per-VSAN basis, and one FCF switch may have different priorities in
different VSANs.
The priority configuration for the switch does not take effect until a disruptive reconfiguration is performed
by using the domain restart disruptive command.