R21xx-HP FlexFabric 11900 FCoE Command Reference

31
Examples
# Specify the priority as 64 for the switch in VSAN 1.
<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] priority 64
Related commands
domain restart
timer distributed-services
Use timer distributed-services to specify the distributed service timeout period for a specified VSAN.
Use undo timer distributed-services to restore the default.
Syntax
timer distributed-services value
undo timer distributed-services
Default
The distributed service timeout period is 5000 milliseconds.
Views
VSAN view
Predefined user roles
network-admin
Parameters
value: Distributed service timeout period in the range of 5000 to 10000 milliseconds.
Usage guidelines
The distributed service timeout period can be configured in system view or VSAN view:
• The configuration made in system view takes effect on all VSANs. The configuration made in VSAN
view takes effect only on the current VSAN.
• If you configure the distributed service timeout period globally and for the specified VSAN at the
same time, the configuration for the VSAN is given priority.
Examples
# Set the distributed service timeout period to 6000 milliseconds for VSAN 1.
<Sysname> system-view
[Sysname] vsan 1
[Sysname-vsan1] timer distributed-services 6000
Related commands
fc timer distributed-services
timer error-detect
Use timer error-detect to specify the error detection timeout period for a specified VSAN.
Use undo timer error-detect to restore the default.