R21xx-HP FlexFabric 11900 FCoE Command Reference

35
VSAN commands
display vsan port-member
Use display vsan port-member to display the member interfaces of a specified VSAN.
Syntax
display vsan [ vsan-id ] port-member
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vsan-id: Specifies a VSAN by its number in the range of 1 to 3839. If you do not specify this argument,
this command displays the member interfaces of all VSANs.
Examples
# Display the member interfaces of all VSANs.
<Sysname> display vsan port-member
VSAN 1:
Access Ports:
Trunk Ports:
VSAN 100:
Access Ports:
Trunk Ports:
Vfc200
Table 12 Command output
Field Descri
p
tion
Access Ports The switch does not support access ports.
port trunk vsan
Use port trunk vsan to assign the interface to the specified VSANs as a trunk port, so that the port allows
the specified VSANs to pass through.
Use undo port trunk vsan to remove the interface from the specified VSANs.
Syntax
port trunk vsan vsan-id-list
undo port trunk vsan vsan-id-list