R21xx-HP FlexFabric 11900 FCoE Command Reference

46
Parameters
vsan vsan-id: Specifies a VSAN by its number in the range of 1 to 3839. If no VSAN is specified, this
command displays LSDB information for all VSANs.
Usage guidelines
Use this command to display FSPF LSDB information, including the total number of link state records (LSRs)
and specific information about each LSR.
Examples
# Display FSPF LSDB information.
<Sysname> display fspf lsdb
FSPF LSDB information of VSAN 1(01):
Total LSR count: 2
FSPF Link State Database for Domain 01
LSR Type : 1
LSR Age : 0
LSR Incarnation number : 0x80000008
LSR Checksum : 0x7deb
Number of links : 1
NbrDomainID IfIndex NbrIfIndex LinkType Cost
--------------------------------------------------------
2 0x68 0x68 1 265
FSPF Link State Database for Domain 02
LSR Type : 1
LSR Age : 6
LSR Incarnation number : 0x80000008
LSR Checksum : 0x7dea
Number of links : 1
NbrDomainID IfIndex NbrIfIndex LinkType Cost
--------------------------------------------------------
1 0x68 0x68 1 265
Table 18 Command output
Field Descri
p
tion
FSPF LSDB information of
VSAN
LSDB information for a specified VSAN. The value in parentheses is the domain
ID in decimal of the local switch.
FSPF Link State Database for
Domain
LSDB information for a specified domain ID (switch).
LSR Type LSR type, which can only be Switch Link Record (0x01).
LSR Incarnation number LSR instance number.
NbrDomainID Neighbor domain ID.
IfIndex Outgoing interface index of the local switch.
NbrIfIndex Neighbor interface index.
Link Type
Link type:
• 0x01—Point-to-point.
• 0xF0-FF—Vendor-defined.