R21xx-HP FlexFabric 11900 FCoE Command Reference

55
The configured Hello interval must be smaller than the dead interval and must be the same at the two
ends of the link.
Examples
# Configure the Hello interval for interface VFC 1 in VSAN 4 as 10 seconds.
<Sysname> system-view
[Sysname] interface vfc 1
[Sysname-vfc1] fspf hello-interval 10 vsan 4
Related commands
fspf dead-interval
fspf min-ls-arrival
Use fspf min-ls-arrival to configure the minimum LSR receiving interval for a specified VSAN.
Use undo fspf min-ls-arrival to restore the default.
Syntax
fspf min-ls-arrival value
undo fspf min-ls-arrival
Default
The default setting is 1 second.
Views
VSAN view
Predefined user roles
network-admin
Parameters
value: Minimum LSR receiving interval in the range of 0 to 60 seconds.
Usage guidelines
The minimum LSR receiving interval specifies the time between receiving LSRs in a VSAN. Any LSR
instances of the same LSR received within this time are dropped. This helps avoid frequent SPF
calculations caused by LSDB updating.
Examples
# Configure the minimum LSR receiving interval as 10 seconds for VSAN 2.
<Sysname> system-view
[Sysname] vsan 2
[Sysname-vsan2] fspf min-ls-arrival 10
fspf min-ls-interval
Use fspf min-ls-interval to configure the minimum LSR refresh interval for a specified VSAN.
Use undo fspf min-ls-interval to restore the default.
Syntax
fspf min-ls-interval value