R21xx-HP FlexFabric 11900 FCoE Command Reference

The switch can only convert from non-FCoE mode to one FCoE mode, or vice versa, and it cannot convert

directly among the two FCoE modes. To convert among the two FCoE modes, first convert the switch to

non-FCoE mode. After converting the switch to non-FCoE mode, FCoE-related configurations in the

original FCoE mode are cleared.

Examples

# Configure the switch to operate in FCF mode.

<Sysname> system-view

[Sysname] fcoe-mode fcf

# Convert the switch operating in FCF mode to NPV mode.

[Sysname] undo fcoe-mode

All current FC configuration will be lost. Continue? [Y/N]:y

[Sysname] fcoe-mode npv