R21xx-HP FlexFabric 11900 FCoE Command Reference

80
NPV commands
display npv login
Use display npv login to display the nodes on downlink interfaces and their mapped uplink interfaces.
Syntax
display npv login [ vsan vsan-id ] [ interface interface-type interface-number ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vsan vsan-id: Specifies a VSAN by its number in the range of 1 to 3839. If no VSAN is specified, this
command displays the nodes of all VSANs on an NPV switch.
interface interface-type interface-number: Specifies a downlink interface by its type and number. If no
downlink interface is specified, this command displays the nodes on all downlink interfaces on an NPV
switch.
count: Displays the number of nodes on downlink interfaces on an NPV switch.
Usage guidelines
This command is available only when the switch is operating in NPV mode.
Examples
# Display the nodes on downlink interfaces and their mapped uplink interfaces on an NPV switch.
<Sysname> display npv login
Server External
Interface VSAN FCID Port WWN Node WWN Interface
Vfc1 1 0xae0003 10:00:00:00:c9:66:6b:60 20:00:00:00:c9:66:6b:60 vfc2
Table 27 Command output
Field Descri
p
tion
Server Interface
Name of the downlink interface.
External interface Name of the uplink interface mapped by the downlink interface.
FCID FC address of the node.
Port WWN Port WWN of the node connected to the NPV switch.
display npv status
Use display npv status to display the status of the NPV switch.