R21xx-HP FlexFabric 11900 FCoE Command Reference

81
Syntax
display npv status [ vsan vsan-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vsan vsan-id: Specifies a VSAN by its number in the range of 1 to 3839. If no VSAN is specified, this
command displays the status of the switch in all VSANs.
Usage guidelines
You can use this command to display the status of each interface in VSANs, including VSAN tagging
mode, interface state, and FC address.
This command is available only when the switch is operating in NPV mode.
Examples
# Display the status of the NPV switch in VSAN 1.
<Sysname> display npv status vsan 1
External Interfaces:
Interface: Vfc1 VSAN tagging mode: Tagging
VSAN State FCID
10 Down
Number of External Interfaces: 1
Server Interfaces:
Number of Server Interfaces: 0
# Display the status of the NPV switch in all VSANs.
<Sysname> display npv status
External Interfaces:
Interface: Vfc100 VSAN tagging mode: Tagging
VSAN State FCID
10 Down
Number of External Interfaces: 1
Server Interfaces:
Interface: Vfc101 VSAN tagging mode: Tagging
VSAN State
10 Down
20 Down
Number of Server Interfaces: 1