R21xx-HP FlexFabric 11900 FCoE Command Reference

87
FC tracert commands
fctracert
Use fctracert to detect bidirectional routing information between source and destination. The destination
can be a node or FC switch.
Syntax
fctracert [ -t timeout ] fcid fcid vsan vsan-id
Views
Any view
Predefined user roles
network-admin
Parameters
-t timeout: Specifies the timeout value in seconds for the entire FC tracert process. The value range is 1
to 10 and defaults to 5.
fcid fcid: Specifies the destination address. If the destination is a node, the fcid argument indicates the FC
address of the node. If the destination is an FC switch, the fcid argument indicates the domain controller
address FFFCxx of the switch, where xx is the domain ID of the destination switch. For example, if the
domain ID of the destination switch is 3, its domain controller address is FFFC03.
vsan vsan-id: Specifies an existing VSAN by its number in the range of 1 to 3839.
Usage guidelines
The bidirectional routing information includes WWNs and domain controller addresses of all switches
on a round trip. The device supports a maximum of 255 hops for a round trip.
To abort the FC tracert operation during the execution of the command, press Ctrl+C.
Examples
# Detect bidirectional routing information between source and destination (a node with FC address
0xd70000) in VSAN 1.
<Sysname> fctracert fcid d70000 vsan 1
Route present for: 0xd70000, press CTRL_C to break.
20:00:00:0b:46:00:02:82(0xfffcd5)
20:00:00:05:30:00:18:db(0xfffcd7)
20:00:00:05:30:00:18:db(0xfffcd7)
20:00:00:0b:46:00:02:82(0xfffcd5)
Fctracert completed.
Table 30 Command output
Field Descri
p
tion
Route present for Path from source to destination.
press CTRL_C to break
During the execution of the command, press Ctrl+C to abort the FC tracert
operation.
20:00:00:0b:46:00:02:82 WWN value.