R21xx-HP FlexFabric 11900 FCoE Configuration Guide

12
Configuring VFC interfaces and FIP
VFC interfaces and FIP configuration task list
Tasks at a
g
lance
(Required.) Configuring a VFC interface
(Required.) Enabling FCoE for a VLAN and mapping a VSAN to the VLAN
(Optional.) Configuring the FC-MAP value
(Optional.) Configuring the FKA advertisement period value
(Optional.) Configuring the FCF priority
Configuring a VFC interface
Ste
p
Command Remarks
1. Enter system view. system-view N/A
2. Create a VFC interface and
enter its view.
interface vfc interface-number N/A
3. Configure the VFC interface
mode.
fc mode { e | f | np }
By default, a VFC interface operates
in F mode.
• When an FCF switch operates in
FCF mode, VFC interfaces support
E and F modes.
• When an FCF switch operates in
NPV mode, FC interfaces support
F and NP modes.
4. Bind the VFC interface to the
specified Ethernet interface.
bind interface interface-type
interface-number [ mac
mac-address ]
By default, no Ethernet interface is
bound to a VFC interface.
The VFC interface sends and receives
packets through the Ethernet interface
bound to it.
5. Assign the VFC interface to
the specified VSAN as a
trunk port.
port trunk vsan vsan-id
By default, a VFC interface does not
belong to any VSAN as a trunk port.
6. (Optional.) Configure a
description for the VFC
interface.
description text
By default, the description of an
interface is Interface name Interface,
for example, Vfc1 Interface.
7. (Optional.) Restore the
default settings for the VFC
interface.
default N/A
8. Bring up the VFC interface.
undo shutdown By default, a VFC interface is up.