R21xx-HP FlexFabric 11900 FCoE Configuration Guide

[SwitchA-Vfc1] bind interface ten-gigabitethernet4/0/1

[SwitchA-Vfc1] fc mode e

[SwitchA-Vfc1] port trunk vsan 1

[SwitchA-Vfc1] quit

2. Configure Switch B:

# Configure Switch B to operate in advanced mode, save the configuration, and reboot Switch B.

(Skip this step if the switch is operating in advanced mode.)

<SwitchB> system-view

[SwitchB] system-working-mode advance

Do you want to change the system working mode? [Y/N]:y

The system working mode is changed, please save the configuration and reboot the

system to make it effective.

# Enable the fabric configuration function (optional, because this function is enabled by default),

and configure Switch B to operate in FCF mode.

<SwitchB> system-view

[SwitchB] fcoe-mode fcf

[SwitchB] vsan 1

[SwitchB-vsan1] domain configure enable

# Set the priority value to 1, so that Switch B can be selected as the principal switch.

[SwitchB-vsan1] priority 1

[SwitchB-vsan1] quit

# Enable FCoE for VLAN 10 and map it to VSAN 1.

[SwitchB] vlan 10

[SwitchB-vlan10] fcoe enable vsan 1

[SwitchB-vlan10] quit

# Create interface VFC 1, bind it to interface Ten-GigabitEthernet 4/0/1, configure it to operate

in E mode, and assign it to VSAN 1 as a trunk port.

[SwitchB] interface Vfc 1

[SwitchB-Vfc1] bind interface ten-gigabitethernet4/0/1

[SwitchB-Vfc1] fc mode e

[SwitchB-Vfc1] port trunk vsan 1

[SwitchB-Vfc1] quit

# Create interface VFC 2, bind it to interface Ten-GigabitEthernet 4/0/2, configure it to operate

in E mode, and assign it to VSAN 1 as a trunk port.

[SwitchB] interface Vfc 2

[SwitchB-Vfc2] bind interface ten-gigabitethernet4/0/2

[SwitchB-Vfc2] fc mode e

[SwitchB-Vfc2] port trunk vsan 1

[SwitchB-Vfc2] quit

# Create interface VFC 3, bind it to interface Ten-GigabitEthernet 4/0/3, configure it to operate

in E mode, and assign it to VSAN 1 as a trunk port.

[SwitchB] interface Vfc 3

[SwitchB-Vfc3] bind interface ten-gigabitethernet4/0/3

[SwitchB-Vfc3] fc mode e

[SwitchB-Vfc3] port trunk vsan 1

[SwitchB-Vfc3] quit

3. Configure Switch C: