R21xx-HP FlexFabric 11900 FCoE Configuration Guide

67
Ste
p
Command Remarks
3. Configure zone
distribution and merge
types as complete
distribution and complete
merge.
zoneset distribute full
The default setting is incomplete
distribution and incomplete merge.
Activating a zone set and distributing it to the entire
fabric
You can activate a zone set as the active zone set on a switch, distribute the active zone set to the entire
fabric, and implement access control through the active zone set. The modifications to the active zone set
do not take effect until reactivation.
When distributing the active zone set to the entire fabric, the switch determines whether to carry zone
database information according to the distribution type specified by the zoneset distribute full
command.
The modifications to the active zone set do not take effect until reactivation.
Only one active zone set can exist in a VSAN.
To activate a zone set and distribute it to the entire fabric:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter VSAN view. vsan vsan-id N/A
3. Activate the specified zone set
as the active zone set and
distribute it to the entire fabric.
zoneset activate name zoneset-name
The zone set to be activated
must have been created and
must consist of at least one
N_Port member.
NOTE:
A
ctive zone set information will not contain the alias names of zone members. If a zone in the active zone
set has members with a zone alias, the non-overlapping N_Port members in the zone alias are directly
added to the zone. You can display zone members by zone by using the display zoneset active
command.
Triggering a complete distribution
Use the zoneset distribute command to trigger a complete distribution, which distributes both the active
zone set and zone database.
After activating a zone set as the active zone set by using the zoneset activate command, you can modify
the database configuration. With the zoneset distribute command, you can distribute the active zone set
and the modified database to the entire fabric without changing the active zone set.
To activate a complete distribution: