R21xx-HP FlexFabric 11900 FCoE Configuration Guide

# Configure Switch A to operate in advanced mode, save the configuration, and reboot Switch A.

(Skip this step if the switch is operating in advanced mode.)

<SwitchA> system-view

[SwitchA] system-working-mode advance

Do you want to change the system working mode? [Y/N]:y

The system working mode is changed, please save the configuration and reboot the

system to make it effective.

# Configure Switch A to operate in FCF mode. Create interface VFC 100, bind it to interface

Ten-GigabitEthernet 1/0/2, configure it to operate in E mode, and assign it to VSAN 1 as a trunk

port.

<SwitchA> system-view

[SwitchA] fcoe-mode fcf

[SwitchA] interface Vfc 100

[SwitchA-Vfc100] bind interface Ten-GigabitEthernet1/0/2

[SwitchA-Vfc100] fc mode f

[SwitchA-Vfc100] port trunk vsan 10

[SwitchA-Vfc100] quit

# Enable the fabric configuration function.

[SwitchA] vsan 1

[SwitchA-vsan1] domain configure enable

# Configure the domain ID as 1.

[SwitchA-vsan1] domain-id 1 static

Non-disruptive reconfiguration or isolating the switch may be performed. Continu

e? [Y/N]:y

[SwitchA-vsan1] quit

# Enable FCoE for VLAN 10 and map it to VSAN 1.

[SwitchA] vlan 10

[SwitchA-vlan10] fcoe enable vsan 1

[SwitchA-vlan10] quit

# Configure a static route.

[SwitchA-vsan1] fc route-static 020000 8 Vfc100

2. Configure Switch B:

# Configure Switch B to operate in advanced mode, save the configuration, and reboot Switch B.

(Skip this step if the switch is operating in advanced mode.)

<SwitchB> system-view

[SwitchB] system-working-mode advance

Do you want to change the system working mode? [Y/N]:y

The system working mode is changed, please save the configuration and reboot the

system to make it effective.

# Configure Switch B to operate in FCF mode. Create interface VFC 200, bind it to interface

Ten-GigabitEthernet 1/0/2, configure it to operate in E mode, and assign it to VSAN 1 as a trunk

port.

<SwitchB> system-view

[SwitchB] fcoe-mode fcf

[SwitchA] interface Vfc 200

[SwitchA-Vfc200] bind interface Ten-GigabitEthernet1/0/2

[SwitchA-Vfc200] fc mode f