R21xx-HP FlexFabric 11900 FCoE Configuration Guide

[SwitchA-Vfc200] port trunk vsan 1

[SwitchA-Vfc200] quit

# Enable the fabric configuration function.

[SwitchB] vsan 1

[SwitchB-vsan1] domain configure enable

# Configure the domain ID as 2.

[SwitchB-vsan1] domain-id 2 static

Non-disruptive reconfiguration or isolating the switch may be performed. Continu

e? [Y/N]:y

[SwitchA-vsan1] quit

# Enable FCoE for VLAN 10 and map it to VSAN 1.

<SwitchA> system-view

[SwitchA] vlan 10

[SwitchA-vlan10] fcoe enable vsan 1

[SwitchA-vlan10] quit

# Configure a static route.

[SwitchB-vsan1] fc route-static 010000 8 Vfc200

Verifying the configurations

Check whether Switch A and Switch B can reach each other.

# On Switch A, use the fcping command to ping Switch B and check whether Switch B is reachable.

[SwitchA-vsan1] fcping fcid fffc02 vsan 1

FCPING fcid 0xfffc02: 128 data bytes, press CTRL_C to break.

Reply from 0xfffc02: bytes = 128 time = 23 ms

Reply from 0xfffc02: bytes = 128 time = 9 ms

Reply from 0xfffc02: bytes = 128 time = 19 ms

Reply from 0xfffc02: bytes = 128 time = 14 ms

Reply from 0xfffc02: bytes = 128 time = 25 ms

--- 0xfffc02 fcping statistics ---

5 packet(s) transmitted

5 packet(s) received

0.00% packet loss

round-trip min/avg/max = 9/18/25 ms