R21xx-HP FlexFabric 11900 Fundamentals Command Reference

93
Predefined user roles
network-admin
Parameters
marker: Specifies the retransmit marker.
Usage guidelines
You can perform this operation only after you log in to the FTP server.
Support for this command varies with FTP servers.
Examples
# Retransmit the file h.c (82 bytes) from 2 bytes.
ftp> restart 2
restarting at 2. execute get, put or append to initiate transfer
ftp> put h.c h.c
local: h.c remote: h.c
350 Restart position accepted (2).
150 Ok to send data.
226 File receive OK.
80 bytes sent in 0.000445 seconds (175.6 kbyte/s)
ftp> dir
150 Here comes the directory listing.
-rw-r--r-- 1 0 0 80 Jul 18 02:58 h.c
rhelp
Use rhelp to display the FTP-related commands supported by the FTP server.
Use rhelp protocol-command to display the help information of an FTP-related command supported by
the FTP server.
Syntax
rhelp [ protocol-command ]
Views
FTP client view
Predefined user roles
network-admin
Parameters
protocol-command: Specifies an FTP-related command.
Usage guidelines
You can perform this operation only after you log in to the FTP server.
Support for this command depends on the FTP server model.
Examples
# Display the FTP-related commands supported by the FTP.
ftp> rhelp
214-The following FTP commands are recognized