R21xx-HP FlexFabric 11900 Fundamentals Command Reference

103
The source IP address specified with the tftp client source command applies to all TFTP connections while
the one specified with the tftp command applies only to the current TFTP connection.
Examples
# Download the new.bin file from the TFTP server at 192.168.1.1 and save it as new.bin.
<Sysname> tftp 192.168.1.1 get new.bin
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 13.9M 100 13.9M 0 0 1206k 0 0:00:11 0:00:11 --:--:-- 1206k
<System>
Table 14 Command output
Field Descri
p
tion
% Percentage of file transmission progress.
Total Size of files to be transmitted, in bytes.
% Percentage of received file size to total file size.
Received Received file size, in bytes.
% Percentage of sent file size to total file size.
Xferd Sent file size, in bytes.
Average Dload Average download speed, in bps.
Speed Upload Average upload speed, in bps.
Related commands
tftp client source
tftp client source
Use tftp client source to specify the source IP address for TFTP packets sent by the TFTP client.
Use undo tftp client source to restore the default.
Syntax
tftp client source { interface interface-type interface-number | ip source-ip-address }
undo tftp client source
Default
No source IP address is configured for sent TFTP packets. The device uses the primary IP address of the
output interface of the route to the server as the source IP address.
Views
System view
Predefined user roles
network-admin
Parameters
interface interface-type interface-number: Specifies the source interface for establishing TFTP
connections. The primary IP address of the source interface is used as the source IP address of packets